One of the complaints we hear most often from our customers is on the grade, dirty dirty lime scale and mounted their heads showering with hard water in this country. A large part of our customers do not care about the health benefits of a shower filter, really do not care much about removing chlorine or heavy metals or benefits of soft leather or healthy hair. What matters more is on the filter will stop shower head to become so dirty, crunchy and global, so repulsive!? In these cases, we are always very pleased that our customers know, yes! Installing a shower filter will help remove lime, calcium and other pollutants that cause the heads to become encrusted with dirt so painful unattractive level.

Sometimes customers only buy a new shower head that has a built-in filter, sometimes customers like to buy a shower filter online. Which means they retain their existing shower head and install our shower filter including shower head meets the water outlet (or if the pipe meets the water outlet). This means that more often than not have to give your existing shower head and a good clean thoroughly before installing shower filter – so once this is done, the shower filter will help keep the status of your clean shower head and it is not necessary to clean the shower head almost all times.

In this article we will discuss some great methods of cleaning the shower head & Shower head extensions to give you, like new spark and also remove dirt and bacteria also constructed which can be very dangerous to your health.

What Are The Best Products To Use?

If you walk down any market for super-clean island you will notice that there is a huge amount of bathroom cleaners, cleaning lime, rust, stripes, white, free sign, the list goes on and on.

Usually this type of cleaning chemicals are of two different types: alkaline and acid cleaners cleaners. Typical ingredients of an acid scavenger include acids (phosphoric, citric, hydroxyacetic), anionic or nonionic, glycol ethers, alcohols, citrates, sodium EDTA. The ingredients are typical of an alkaline detergent: sodium carbonate, sodium hydroxide, sodium hypochlorite, anionic or nonionic, glycol ethers, alcohols, citrates, sodium EDTA. Detergents based acids are not always the best for tiles and shower surfaces as they may damage the enamel finish, in order to be aware of this.

When any type of chemicals used in your bathroom should always be very careful. As the bath is a place where a lot of our skin is exposed and inhale the hot gas stream, it is always beneficial to go for a more natural way for cleaning. There are many excellent natural cleaning products on the market that work very well. But in the case of cleaning dirt and lime shower you cannot go beyond the natural power of white vinegar.

Method One: Remove The Shower Head

If you can be bothered to remove the head, this is the best way to give the best clean, bringing back the state in which it was originally.

Step 1- Using a wrench, remove the head of the hose is connected. Or, if connected to a tube, then remove the hand shower metal pipe. Remember that after removing the water always runs out of exposed pipe, so be careful not to slip!

Step 2- Position the shower head in a (large enough to completely immerse the shower head) bread oven thick bottom.

Step 3- Fill the pot with enough white vinegar to completely submerge the shower head and make sure that float on top of vinegar and do not touch the bottom of the pot (very important).

Step 4- Turn on the stove and gently cook the vinegar, do not boil. Keep an eye on him all the time and make sure the temperature is not too hot and never leave him alone. Depending on the amount of scale and sludge is attached to the head is how long simmered in the shower.

Step 5- Once the limestone and other contaminants are released away from the shower head, remove the head of the vinegar. At this point (with gloves), we recommend using a toothbrush to remove any stubborn stain and stubborn lime.

Step 6- Rinse again and reinstall, then let the water run through my head for a few minutes to ensure that all contamination is eliminated and lime inside the head as well.

Method Two: Cleaning With Attached Head

If you do not want to delete, so here’s a little trick you can do to clean the well.

Step 1 – Find a plastic bag or small plastic bag which completely covers the face of the head.

Step 2 – Lightly pour the ziplock bag with vinegar.

Step 3 – Place the bag on the face of the shower head, making sure the face of the shower head is dipped in vinegar.

Step 4 – Set the bag with strings or rubber bands on the head and leave overnight.

Step 5 – The next day, with a toothbrush, brush the side of the head and eliminate all limescale, dirt and other contaminants.

Also Read:

The Best Time To Take A Shower